CP1 Magazine 3D Printed

CP1 Magazine 3D Printed

SMK Artemis Cp1 Mags .177 .22 .25

THE HIGH CAPACITY MAGAZINE BOTH 177 & 22 CALL STICK UP ABOUT "17MM HIGHER" THAN THE STANDARD MAGAZINE....so better when using a scope with high mounts.

CP1 Magazine Size

Small CP1 Magazine in 177 is 9 Shot

Large CP1 Magazine in 177 is a 14 Shot

Small CP1 Magazine in 22 is 8 Shot

Large CP1 Magazine in 22 is a 12 Shot

All magazines are printed from PETG FILAMENT "polyethylene terephthalate glycol" which is stronger, more robust, better heat resistant.
These magazines line up perfect with the barrel so no pellets get damaged or flights bent or dented when pushing the pellet through the magazine into the barrel "NICE SMOOTH ACTION" so highly reduces the chance of 'FLYERS' OR CLIPPING when leaving the barrel.
These magazines are so much easier to load than the original mags, every pellet loads straight from the top nose first so no having to turn the top round then turn over to load the first pellet skirt first,just simply turn the colored wheel to the FIRST hole you come to, drop the pellet in NOSE first then so on and so on until the wheel is full.

The red and green colors are just for the show, different colors will be sent out at random.

SMK / Artemis / Victory 3D Mags are available in the following Calibers

.177

.22

.25