• Each box contains 30 mops
• Contents = approx 15 gun cleaning sessions
• Made in Britain
• Made from 100% biodegradable material
• All materials used are fully recyclable
• Also suitable for use in overbored guns

Spray some solvent/cleaner inside your bores. Then use a cleaning rod with a phosphor bronze brush attached and rod through several times to loosen the powder and shot residue.

Remove the brush from the rod.

Push a mop into each chamber, giving them a twist as you push them in, as they are designed to fit tight.

Expect some resistance and squeaking as you push them through the bores with the rod.

These mops will be heavily soiled — please dispose of them responsibly.

To remove any light residue — push another mop into each chamber and rod through.

Finally, spray gun oil inside the bores and using the same mops — rod them through. This will coat your bores with a thin film of clean oil to protect them in storage.

Keep these mops to be used first the next time you clean your gun as they will only be lighted soiled.