ENDURA 3.5-25x56 FFP

What’s Included?

- Flip up lens covers x 1 set

- Sunshade x 1

- Lens cleaning cloth

- Driver tool for windage/elevation turret caps

- Throw lever tool to aid in quick adjustment of the magnification ring

- Zero-Stop (Pre-installed on elevation turret)

Basics

1 - Objective end. Contains the objective lens assembly and objective lens hood. The larger flip up lens

cover will push-fit here.

2 - Ocular end. This is threaded for adjustment, sometimes referred to diopter correction or ‘European style

fast focus eyepiece’. See ‘Guidance For Use’ for instructions on how to adjust this to your eye. The smaller

flip up lens cover will push-fit here.

3 - Eyepiece section. Houses the ocular lens assembly

4 - Magnification ring. This rotates to adjust the magnification setting. The throw lever can be installed

here as pictured (Right) after the small outer dust cap has been removed.

5 - Side parallax adjustment turret. Sometimes referred to as ’side focus’ or ’SF’. This turret is used to

remove parallax. It adjusts back and forth from a minimum parallax distance of around 13m out to infinity.

6 - Elevation and Windage turrets. These are used to adjust the position of the reticle and ’zero in’. Com-

pensate for windage and adjust to engage targets at different ranges with these.

7 - Saddle section. This houses the elevation, windage and side parallax turrets. To the front and rear of the

saddle section is the 34mm main tube.