KLI Titan 6 Inch Chrome Revolver Dual Ammo
Chrome Viper 6" 177 Pellet & 4.5mm BB Co2 Air Pistol
his is the KL Herc 6 Airgun Revolver Co2 Dual Ammo Silver Titan with Tactical Rails. This outstanding airgun is now in stock and with low-cost home delivery. KL Herc 6 Inch Titan Air Revolver is Co2 powered and offers Dual Ammo shooting. It’s a great tactical-looking airgun revolver that will not disappoint.
KL HERC 6 AIRGUN REVOLVER
This is the KL Herc 6 Airgun Revolver Co2 Dual Ammo Silver Titan with tactical rails. This outstanding revolver from Krown Land is the Herc 6 in silver. It offers the option to use Dual Ammo, i.e. the shell mags take a single 4.5 BB pushed into the back or by simply unscrewing the shell magazine, you can then place a .177 pellet into it. You can even mix it up, a few shells can be 4.5 BB and the rest pellets. This new airgun 6-shooter revolver is powered by Co2 powered and takes a standard airgun cartridge. Please note that the rails are not fitted to the revolver. However, both rails and the tool are included to do this. Please see the installation instructions on this page for more information.
FEATURES
- High-powered airgun revolver
- Full metal construction
- 4.5mm (.177) Calibre
- Dual Ammo: BB + Pellets
- Full Metal Shell Magazines
- Tactical Rail System Top/Bottom
IN THE BOX
- KL-Herc 6 Airgun Revolver Silver
- 6 Metal Shell Mags (Dual-Ammo)
- Shell Mag Loader
- Top Metal Tactical Rail
- Bottom Metal Tactical Rail
- Allen Key Tool
- Pistol Case Black
- English User Manual
TACTICAL RAIL INSTAL
In the box, you will get a top and bottom optional tactical rail and an Allen Key tool. The hex Grub Screws are pre-installed into the rails. The bottom rail is simple; first, make sure that the grub screws are flush on the underside of the rail, then simply slide the rail from the frount and hand tighten the grub screws to fix the rail in place. Now for the top rail; again, make sure that the grub screws are flush with the underside of the rail. Then you need to remove the rear sight by removing the top screw and the side screw completely. Now tap out the pin holding the sight in place. The best way to do this is to lay the gun on its left side, the side with the safety switch. Then tap out the pin with a small hammer and a hex driver, small screwdriver or similar. Now slide the rail onto the top of the revolver and tighten the grub screws. Then, finally, replace the rear sight the same way but in reverse.
SPECIFICATIONS
GUN TYPE AIR PISTOL
NAME HERC 6
PLATFORM REVOLVER
MAKE KROWN LAND
CONSTRUCTION FULL METAL
GRIP POLYMER
SIGHTS OPEN
CALIBRE 4.5 / .177
AMMO TYPE BB + PELLET
MAGAZINE METAL SHELLS
ROUNDS 6
POWER TYPE CO2
FPS 350+
SAFETY MANUAL
1:1 SCALE N/A
TOP RAIL FULL METAL
BOTTOM RAIL FULL METAL
TOOLS YES
INNER BARREL 105MM
LENGTH 295MM
WEIGHT 995G
